Inhale H2 Hydrogen Inhalation System Review, Test Results & Discount
$6499
$6249.00
Description :
This Inhale H2 hydrogen inhalation device review includes independent H2HUBB test results, verified hydrogen concentration and flow performance, safety features, product specifications, and exclusive savings available through the H2HUBB hydrogen marketplace.
This professional hydrogen inhalation device provides selectable 1–4% H₂ concentrations through a controlled hydrogen-air delivery system. H2HUBB’s follow-up validation calculated hydrogen output ranging from approximately 133 to 487 mL/min while maintaining the intended concentration range.
Inhale H2 Hydrogen Inhalation System Review & Test Results
Inhale H₂ Hydrogen Inhalation System
The Inhale H₂ is a professional-grade, single-user hydrogen-air inhalation system designed to deliver controlled molecular hydrogen concentrations through a specialized mask and breathing-bag system. It uses PEM/SPE membrane electrolysis to generate greater than 99.9% pure hydrogen before immediately mixing it with ambient air for inhalation.
The current Inhale H₂ configuration delivers selectable hydrogen concentrations of approximately 1%, 2%, 3%, and 4% H₂ at approximately 12 L/min of total mixed-gas flow. H2HUBB’s follow-up validation and scaled performance analysis found that this corresponds to approximately 133–487 mL/min of hydrogen output, while maintaining a calculated concentration range of approximately 1.11–4.06% H₂.
In H2HUBB’s original direct testing, the system produced approximately 105–395 mL/min of hydrogen across its four settings and maintained measured concentrations of approximately 1.10–4.05% H₂. These results closely matched the manufacturer’s specifications and confirmed consistent performance across each output level. The system’s electrolytic efficiency averaged approximately 95% during testing.
A dual-valve rebreather mask and 3-liter hydrogen-air breathing bag help preserve the prepared gas mixture between breaths. The mask directs inhaled gas from the system while allowing exhaled air to vent into the room, reducing backflow and helping maintain the selected hydrogen concentration throughout the session.
The Inhale H₂ also includes multiple integrated safety features, including a 1% internal hydrogen leak sensor with automatic shutdown, low-water protection, internal ventilation fans, HEPA filtration, a gas separator, deionization filters, heat vents, pressure-relief support, and automatic shutoff controls. Its hydrogen concentrations remain within the system’s intended 1–4% range and below the commonly cited lower flammability threshold in ambient air during normal operation.
Additional features include an integrated humidifier, a 1-liter distilled-water reservoir, real-time digital controls, and an adjustable session timer ranging from 1 minute to 100 hours. Its precise concentration control, long-session capability, validated gas output, and safety-focused design make it suitable for home use, wellness environments, research applications, elderly-care settings, and professional facilities.
Overall, H2HUBB confirmed the manufacturer’s performance claims and identified no safety deficiencies during evaluation. Based on its verified hydrogen output, concentration accuracy, delivery design, and integrated safeguards, the Inhale H₂ was awarded the H2HUBB Seal of Approval.
Shop the Inhale H₂ through the H2HUBB hydrogen marketplace and use code AF13Z7F3CD0J7A5927F3CD0J7A5 at checkout to save $250 off the $6,499 retail price—now only $6,249.
Learn more about how H2HUBB evaluates hydrogen products in our H2HUBB Product Performance Standards
Inhale H₂ Hydrogen Inhalation System
About Inhale H₂
Founded in 2023, Inhale H₂ was created to make controlled hydrogen-air inhalation more accessible for home users, wellness professionals, researchers, and clinical environments. The company focuses on precise hydrogen delivery, practical usability, and safety-conscious engineering.
Inhale H₂ was developed through the shared vision of Alex Tarnava, known for his work developing open-cup molecular hydrogen tablets, and Tyler W. LeBaron, MSc, PhD, a molecular hydrogen researcher and Executive Director of the Molecular Hydrogen Institute. Their goal was to create an inhalation system capable of delivering consistent hydrogen concentrations while reducing gas waste and keeping the final hydrogen-air mixture within a controlled range.
Following years of research, product development, and collaboration with U.S.-based engineers, the company introduced the Inhale H₂ Hydrogen Inhalation System. The device combines PEM/SPE electrolysis, adjustable hydrogen concentration settings, a dual-valve mask, and a 3-liter breathing bag in a single-user system designed for extended inhalation sessions.
Inhale H₂ developed the hydrogen inhalation device for precise single-user delivery in home, wellness, research, and professional settings.
Inhale H₂ Hydrogen Inhalation System
The Inhale H₂ is a professional-grade hydrogen mixed-with-air inhalation system that provides selectable concentrations of approximately 1%, 2%, 3%, and 4% H₂. The current configuration operates at approximately 12 L/min of total mixed-gas flow.
H2HUBB’s follow-up validation and scaled performance analysis found that the current configuration corresponds to approximately 133–487 mL/min of hydrogen output while maintaining a calculated concentration range of approximately 1.11–4.06% H₂.
The system includes a specialized dual-valve rebreather mask and a 3-liter hydrogen-air breathing bag. These components collect and preserve the prepared gas mixture between breaths, direct inhaled gas from the device, and allow exhaled air to vent into the surrounding room.
Independent H2HUBB testing also confirmed consistent hydrogen output across all four settings, approximately 95% average electrolytic efficiency, and multiple integrated safety mechanisms. Based on its verified performance, delivery design, and safety features, the Inhale H₂ was awarded the H2HUBB Seal of Approval.
The Inhale H₂ Hydrogen Inhalation System is available through the H2HUBB hydrogen marketplace. Shopping through H2HUBB provides access to independent test results, verified performance information, current pricing, and an exclusive product discount.
Current H2HUBB Offer
- Retail Price: $6,499 USD
- H2HUBB Discount: $250 off
- Exclusive H2HUBB Price: $6,249 USD
- Discount Code: AF13Z7F3CD0J7A5927F3CD0J7A5
- Product Type: Professional-grade hydrogen mixed-with-air inhalation system
- H2HUBB Status: Independently tested and awarded the H2HUBB Seal of Approval
Product Highlights
- Selectable 1%, 2%, 3%, and 4% hydrogen concentration settings
- Approximately 12 L/min of total mixed-gas flow
- Validated hydrogen output of approximately 133–487 mL/min
- PEM/SPE membrane electrolysis
- Greater than 99.9% pure hydrogen before mixing with ambient air
- Dual-valve rebreather mask
- 3-liter hydrogen-air breathing bag
- Adjustable session timer from 1 minute to 100 hours
- Integrated humidifier and 1-liter distilled-water reservoir
- Internal 1% hydrogen leak sensor with automatic shutdown
- HEPA filtration, low-water protection, ventilation fans, and pressure-relief support
- Designed for home, wellness, research, elderly-care, and professional environments
Warranty
The Inhale H₂ includes a 1-year manufacturer warranty covering parts and labor. Customers are responsible for applicable shipping costs, duties, and taxes. Warranty claims and service requests should be submitted directly to Inhale H₂.
Inhale H₂ Product Specifications
The Inhale H₂ is a professional-grade, single-user hydrogen mixed-with-air inhalation system. It uses PEM/SPE membrane electrolysis to generate high-purity hydrogen before combining it with ambient air at selectable concentrations of approximately 1–4% H₂.
Hydrogen Output and Concentration
- Hydrogen Delivery Type: Pure hydrogen mixed with ambient air
- Selectable H₂ Settings: 1%, 2%, 3%, and 4%
- Current Total Mixed-Gas Flow: Approximately 12 L/min
- Current Validated H₂ Output: Approximately 133–487 mL/min
- Current Validated H₂ Concentration: Approximately 1.11–4.06%
- Original Directly Measured H₂ Output: Approximately 105–395 mL/min
- Original Directly Measured H₂ Concentration: Approximately 1.10–4.05%
- Hydrogen Purity Before Air Mixing: Greater than 99.9%
- H2HUBB Test Method: Alicat hydrogen mass flow meter with applicable values standardized to SATP
H2HUBB directly measured the original system configuration at approximately 105–395 mL/min. After the system was updated to approximately 12 L/min of total mixed-gas flow, H2HUBB performed follow-up validation and scaled the original data to confirm a current hydrogen-output range of approximately 133–487 mL/min.
PEM/SPE Electrolytic System
- Hydrogen Cell Technology: PEM/SPE membrane electrolysis
- Electrolytic Cell Configuration: One stack with three PEM cells wired in series
- Voltage Per Cell: Approximately 1.60–1.75 V
- Applied System Voltage: Approximately 4.8–5.235 V DC
- Measured System Current: Approximately 5.06–18 A DC
- Measured Power Consumption: Approximately 24–94 W, depending on the selected setting
- Average Electrolytic Efficiency: Approximately 95%
- Maximum Measured Efficiency: Approximately 96% at the highest setting
Session Controls
- Control Interface: Digital display and rotary control knob
- Session Timer: Adjustable from 1 minute to 100 hours
- Display Information: Selected hydrogen concentration and current session duration
- Emergency Stop: Pressing the control knob during operation immediately stops gas production
- Continuous Operation: Designed to support extended sessions, including sessions longer than 8 hours
Gas Delivery System
- Mask: Specialized dual-valve rebreather mask
- Breathing Bag: 3-liter hydrogen-air breathing bag
- Inhalation Path: User inhales the prepared hydrogen-air mixture from the breathing bag
- Exhalation Path: Exhaled air is directed into the surrounding room rather than back into the system
- Humidification: Integrated water bubbler and humidifier
- Gas Conservation: Breathing bag stores the prepared mixture between breaths to reduce gas loss
Water Reservoir
- Reservoir Capacity: 1 liter / 1000 mL / 33.81 oz
- Required Water: Distilled or deionized water only
- Drainage: Bottom drain port for emptying the reservoir and internal water system
- Low-Water Protection: Automatically protects the electrolytic cells when water is insufficient
Integrated Safety Features
- Hydrogen Leak Sensor: Internal sensor activates automatic shutdown at approximately 1% H₂ inside the housing
- Final Delivered Concentration: Maintained within the selectable 1–4% H₂ range
- Internal Fans: Support ventilation and reduce the potential for hydrogen accumulation inside the housing
- Gas Separator: Supports hydrogen-gas purity
- Deionization Resin Filters: Help reduce unwanted ions and contaminants
- HEPA Filter: Filters particulates from the ambient-air supply
- Heat Vents: Support internal temperature regulation
- Pressure-Relief Bleeder Opening: Helps prevent excessive pressure in the breathing bag and gas line
- Automatic Shutoff: Stops operation when designated safety conditions are triggered
As with any hydrogen-generating device, the system should be operated away from open flames, sparks, smoking materials, and other ignition sources.
Manufacturer-Stated Physical Specifications
- Rated Input Voltage: AC 100–240 V, 50/60 Hz
- Weight: Approximately 13.6 lb / 6.17 kg
- Dimensions: Approximately 7.4 × 9.0 × 13.4 inches / 188 × 239 × 340 mm
The physical dimensions, weight, and AC input specifications are manufacturer-provided values and were not the primary focus of H2HUBB’s hydrogen-flow evaluation.
H2HUBB Evaluation Status
- Confirmed the manufacturer’s selectable 1–4% hydrogen-concentration range
- Confirmed consistent hydrogen output across all four settings
- Exceeded H2HUBB’s minimum hydrogen-flow performance standard
- Demonstrated approximately 95% average electrolytic efficiency
- No safety deficiencies identified during evaluation
- Independently tested and awarded the H2HUBB Seal of Approval
Product Benefits
- Selectable Hydrogen Concentrations:
Users can choose approximately 1%, 2%, 3%, or 4% H₂ based on the desired session setting. - Validated Hydrogen Output:
H2HUBB’s follow-up validation of the current 12 L/min configuration found an estimated hydrogen output range of approximately 133–487 mL/min. - Consistent Independent Performance:
H2HUBB directly measured the original system configuration at approximately 105–395 mL/min and confirmed that each setting closely matched the manufacturer’s stated hydrogen concentration. - Controlled Hydrogen-Air Delivery:
The system mixes high-purity hydrogen with ambient air before inhalation, providing a final selectable concentration within the intended 1–4% range. - Safety-Focused Concentration Range:
During normal operation, the delivered hydrogen-air mixture remains within the system’s controlled 1–4% range and below the commonly cited lower flammability threshold in ambient air. - Efficient Gas Conservation:
The 3-liter breathing bag stores the prepared hydrogen-air mixture between breaths, helping reduce unnecessary gas loss. - Dual-Valve Mask System:
The specialized mask directs inhaled gas from the breathing bag while venting exhaled air into the room, reducing backflow into the system. - High-Purity Hydrogen Production:
PEM/SPE membrane electrolysis produces greater than 99.9% pure hydrogen before it is mixed with ambient air. - High Electrolytic Efficiency:
H2HUBB measured approximately 95% average electrolytic efficiency across the system’s four concentration settings. - Long-Session Capability:
The adjustable timer supports sessions ranging from 1 minute to 100 hours, allowing flexible use for both shorter and extended inhalation periods. - Integrated Humidification:
The built-in water bubbler adds moisture to the hydrogen-air mixture to improve comfort during inhalation. - Multiple Built-In Safety Features:
The system includes a 1% internal hydrogen leak sensor, automatic shutdown, low-water protection, internal ventilation fans, HEPA filtration, heat vents, and pressure-relief support. - Single-User Design:
The dedicated mask and breathing-bag system are designed to provide controlled and consistent hydrogen delivery for one user. - Versatile Placement:
Suitable for home use, wellness facilities, research environments, elderly-care settings, and professional practices seeking precise hydrogen-air delivery. - H2HUBB Seal of Approval:
Independently evaluated, confirmed to exceed H2HUBB’s minimum hydrogen-flow standard, and awarded the H2HUBB Seal of Approval. - Exclusive H2HUBB Savings:
Shop through H2HUBB and use code AF13Z7F3CD0J7A5927F3CD0J7A5 to save $250 off the $6,499 retail price.
Ideal For
- Home Hydrogen Inhalation Users:
Individuals seeking a professional-grade, single-user system with controlled hydrogen-air concentrations and extended session capability. - Users Prioritizing Precise Concentration Control:
People who want selectable hydrogen settings of approximately 1%, 2%, 3%, and 4% H₂ rather than a fixed-output inhalation device. - Wellness and Professional Facilities:
Practices seeking a validated hydrogen-air delivery system with digital controls, an integrated humidifier, and multiple built-in safeguards. - Research Environments:
Researchers and institutions that require documented hydrogen flow rates, independently measured concentrations, and repeatable output settings. - Long-Session Users:
Individuals who value an adjustable timer ranging from 1 minute to 100 hours for both shorter and extended inhalation sessions. - Safety-Conscious Consumers:
Users who prioritize features such as an internal 1% hydrogen leak sensor, automatic shutdown, low-water protection, HEPA filtration, ventilation fans, and pressure-relief support. - Users Seeking Efficient Gas Delivery:
People who want a dual-valve mask and 3-liter breathing bag designed to preserve the prepared hydrogen-air mixture between breaths and reduce unnecessary gas loss. - Users Comparing Hydrogen Inhalation Systems:
Consumers who prefer independently validated hydrogen concentration, flow-rate, electrical-efficiency, and safety data rather than relying solely on manufacturer claims. - Elderly-Care and Assisted Wellness Settings:
Facilities seeking a single-user system with straightforward digital controls, humidified gas delivery, and an extensive safety design. - H2HUBB Marketplace Shoppers:
Consumers seeking the H2HUBB Seal of Approval, verified product information, and a $250 discount using code AF13Z7F3CD0J7A5927F3CD0J7A5.
