ZYNAFLO H2-Pro Hydrogen Water Bottle Review, Test Results & Discount
$179
$139
Description :
This ZYNAFLO H2-Pro review covers a portable high concentration hydrogen water bottle manufactured by ZYNAFLO. The H2-Pro hydrogen water bottle uses pressure-assisted PEM/SPE electrolysis to produce hydrogen-rich water in a compact 230 mL serving. This page includes independent ZYNAFLO H2-Pro test results, hydrogen-dose calculations, product specifications, contamination testing, current pricing, and information about the available ZYNAFLO H2-Pro discount.
Independent H2HUBB testing using H2Blue® reagent measured an average dissolved-hydrogen concentration of approximately 4.40 mg/L after ten minutes, with a peak concentration of approximately 4.75 mg/L. The tested 230 mL serving contained approximately 1.0 mg of dissolved molecular hydrogen.
ZYNAFLO H2-Pro Review & Independent Test Results
ZYNAFLO H2-Pro Review & Test Results
The ZYNAFLO H2-Pro is a portable high concentration hydrogen water bottle designed to produce hydrogen-rich water in a compact 230 mL serving. It combines pressure-assisted PEM/SPE electrolysis, five- and ten-minute operating cycles, USB-C charging, an aluminum outer shell, a BPA-free polycarbonate water chamber, and a separate bottom vent for oxygen and other anode gases.
Independent H2HUBB testing using H2Blue® reagent measured an average dissolved-hydrogen concentration of approximately 4.40 mg/L after ten minutes. H2HUBB performed at least eight measurements and averaged the results after converting the dissolved-hydrogen readings to SATP.
The highest recorded concentration was approximately 4.75 mg/L. H2HUBB emphasizes the 4.40 mg/L average as the more useful measure of repeatable performance, while the peak represents the highest measured value rather than the concentration that should be expected from every bottle.
The tested 230 mL serving contained approximately 1.0 mg of dissolved H₂, equivalent to approximately 12.14 mL of dissolved hydrogen gas. Based on the independently measured concentration, total hydrogen dose, and practical operating time, H2HUBB recommends the ten-minute cycle for routine use.
H2HUBB testing found no detectable chlorine or ozone and no increase in water pH under the evaluated conditions. The measured ten-minute average also exceeded the manufacturer’s stated 3.0–4.0 mg/L range. Based on its verified hydrogen output, dose, contamination results, construction, and operation, the ZYNAFLO H2-Pro received the H2HUBB Seal of Approval.
Approximate Hydrogen Dose per Bottle
Based on the independently measured ten-minute concentration in the tested 230 mL bottle:
- 10-Minute Average: Approximately 4.40 mg/L
- 10-Minute Peak: Approximately 4.75 mg/L
- 10-Minute H₂ Dose: Approximately 1.0 mg per bottle
- Equivalent Dissolved Gas Volume: Approximately 12.14 mL H₂
- Two Bottles at 10 Minutes: Approximately 2.0 mg of dissolved H₂
- Three Bottles at 10 Minutes: Approximately 3.0 mg of dissolved H₂
- Four Bottles at 10 Minutes: Approximately 4.0 mg of dissolved H₂
Independent Test Procedure
For the H2HUBB evaluation, the H2-Pro was filled with distilled water slightly above the bottom of the threads, the lid was secured, and the bottle was operated on its ten-minute setting. A minimum of eight H2Blue measurements were performed, averaged, and adjusted to SATP for water temperature and atmospheric pressure.
Actual dissolved-hydrogen concentration may vary with water temperature, fill level, headspace, battery charge, membrane condition, lid seal, water type, cycle selection, consecutive use, and the amount of time between cycle completion and consumption. Drink the hydrogen-rich water promptly after opening to reduce dissolved-hydrogen loss.
Current ZYNAFLO H2-Pro Sale
Shop the ZYNAFLO H2-Pro through the H2HUBB hydrogen marketplace to access the current ZYNAFLO H2-Pro discount. The current sale reduces the $179 retail price to $139, providing $40 in savings.
Learn more about how H2HUBB evaluates hydrogen products in our H2HUBB Product Performance Standards.
About ZYNAFLO
ZYNAFLO was founded in 2005 and develops water-treatment equipment, portable hydrogen water generators, hydrogen inhalation equipment, hydrogen bath systems, replacement components, and related wellness products.
The company emphasizes portable hydrogen-generation technology, PEM/SPE electrolysis, reusable product designs, water-treatment solutions, and international product availability.
About the ZYNAFLO H2-Pro
The ZYNAFLO H2-Pro is a portable pressure-assisted hydrogen water bottle with a 230 mL chamber, five- and ten-minute modes, USB-C charging, a self-cleaning mode, a BPA-free polycarbonate body, and an anodized aluminum outer shell.
Independent ZYNAFLO H2-Pro test results measured an average dissolved-hydrogen concentration of approximately 4.40 mg/L and a peak of approximately 4.75 mg/L after ten minutes. The tested 230 mL serving contained approximately 1.0 mg of dissolved H₂.
Shop Through H2HUBB
Shop the ZYNAFLO H2-Pro through H2HUBB to access independent testing, hydrogen-dose calculations, product guidance, the official H2HUBB report, and the current ZYNAFLO sale.
Pricing
Retail Price: $179
Current Sale Price: $139
Current Savings: $40
Shipping and Warranty
ZYNAFLO currently ships worldwide. Shipping is free within the United States, while the manufacturer lists a flat $15 shipping charge for destinations outside the United States.
ZYNAFLO currently provides a 12-month satisfaction warranty for its products. Buyers should review the complete warranty-registration, return, shipping, customs, and international-order terms before purchasing.
ZYNAFLO H2-Pro Discount & Current Offer
The current ZYNAFLO H2-Pro discount reduces the $179 retail price to $139. Shop through the H2HUBB marketplace to access the current sale and save $40.
ZYNAFLO H2-Pro Hydrogen Water Bottle Specifications
The ZYNAFLO H2-Pro is a compact high-pressure PEM/SPE hydrogen water bottle with a 230 mL capacity, five- and ten-minute cycles, USB-C charging, self-cleaning operation, and Rose Gold or Onyx Black finishes.
H2HUBB-Verified ZYNAFLO H2-Pro Test Results
- 10-Minute Average: Approximately 4.40 mg/L
- 10-Minute Peak: Approximately 4.75 mg/L
- 10-Minute Hydrogen Dose: Approximately 1.0 mg H₂
- Equivalent Dissolved-Hydrogen Gas Volume: Approximately 12.14 mL
- Tested Water Volume: 230 mL
- Recommended Setting: 10-minute cycle
- Manufacturer’s 3.0–4.0 mg/L Claim: Confirmed and exceeded
- Tested Model: H2-Pro Onyx Black
- Test Method: H2Blue® reagent
- Testing Repetitions: At least eight measurements averaged
- Results Standardization: Converted to SATP
- Chlorine: No detectable level
- Ozone: No detectable level
- ΔpH: No increase during testing
- H2HUBB Status: H2HUBB Seal of Approval
Bottle and Operating Specifications
- Product: ZYNAFLO H2-Pro Hydrogen Water Bottle Generator
- Model: H2-Pro
- Capacity: Approximately 230 mL or 7.8 oz
- Operating Modes: Five and ten minutes
- Recommended Cycle: Ten minutes
- Technology: High-pressure PEM/SPE electrolysis
- Membrane: DuPont® Nafion solid polymer membrane
- Electrodes: Titanium and platinum electrode system
- Power Button: Press once for five minutes or twice for ten minutes
- Self-Cleaning Mode: Press the power button three times
- Charging: USB Type-C
- Charge Time: Manufacturer lists approximately four hours
- Anode Off-Gas Port: Located on the bottom of the generator
- Recommended Consumption: Drink promptly after cycle completion
Construction and Manufacturer Specifications
- Outer Shell: Aviation-grade anodized aluminum
- Water Chamber: Food-grade BPA-free polycarbonate
- Manufacturer-Listed 5-Minute Range: Approximately 2.0–2.5 mg/L
- Manufacturer-Listed 10-Minute Range: Approximately 3.0–4.0 mg/L
- Battery: Lithium-polymer 3.7 V
- Power Input: DC 5 V / 2 A
- Dimensions: Approximately 190 mm high × 63 mm diameter
- Imperial Dimensions: Approximately 7.5 inches high × 2.5 inches diameter
- Net Weight: Approximately 400 g or 14 oz
- Available Colors: Rose Gold and Onyx Black
Electrical and Internal Performance
- Tested Unit Battery: 3.7 V, 1800 mAh
- Battery Energy: Approximately 6.66 Wh
- Electrolysis Voltage: Approximately 2.80 V
- Electrolysis Current: Approximately 0.65 A
- Electrolysis Power: Approximately 1.82 W
- Theoretical Maximum H₂ Production: Approximately 4.95 mL/min or 0.41 mg/min
- Theoretical Maximum Dissolved Level: Approximately 17.71 mg/L after ten minutes
- Measured Dissolution Efficiency: Approximately 24.84%
Included Equipment
- ZYNAFLO H2-Pro Hydrogen Water Generator
- USB Type-C charging cable
- English instruction manual
- Gift box
Operating Guidance
Fill the bottle according to the manufacturer’s instructions, secure the lid, and select the desired cycle. Use the ten-minute setting for the independently verified performance reported on this page. Drink promptly after the cycle and follow the current charging, self-cleaning, water-quality, storage, and maintenance instructions.
Product Benefits
- Independently verified hydrogen performance:
H2HUBB measured an average concentration of approximately 4.40 mg/L during the ten-minute cycle. - Peak hydrogen concentration:
The highest independently measured result reached approximately 4.75 mg/L. - Measurable dose per bottle:
The tested 230 mL serving contained approximately 1.0 mg of dissolved molecular hydrogen. - Manufacturer claim exceeded:
The 4.40 mg/L H2HUBB average exceeded the manufacturer’s stated 3.0–4.0 mg/L ten-minute range. - High concentration hydrogen water bottle:
The pressure-assisted design produces concentrations above ordinary atmospheric hydrogen saturation. - Compact 230 mL serving:
The bottle provides a practical amount intended to be consumed promptly after hydrogen generation. - Flexible operating modes:
Users can select a five-minute cycle or the independently tested ten-minute setting. - PEM/SPE gas separation:
Hydrogen is directed into the water while oxygen and other anode gases exit through a separate bottom vent. - Verified contamination control:
H2HUBB detected no chlorine or ozone in the tested hydrogen-rich water. - Durable portable construction:
The bottle combines an anodized aluminum shell with a BPA-free polycarbonate water chamber. - USB-C charging:
The common charging connection supports convenient home, work, gym, and travel use. - Built-in self-cleaning mode:
A three-press control activates the manufacturer-listed cleaning cycle. - Independent marketplace approval:
The ZYNAFLO H2-Pro exceeded H2HUBB’s applicable performance requirements and received the H2HUBB Seal of Approval. - Current ZYNAFLO savings:
The current sale reduces the $179 retail price to $139, providing $40 in savings.
Ideal For
- Users seeking a high concentration hydrogen water bottle
supported by independent average, peak, and dissolved-hydrogen dose measurements. - Buyers researching a ZYNAFLO H2-Pro review
who want independently measured results rather than manufacturer claims alone. - Customers wanting approximately 1 mg of H₂ per serving
because the tested ten-minute cycle delivered approximately 1.0 mg in 230 mL. - Users wanting a compact serving size
designed to be consumed promptly after hydrogen generation. - Professionals, travelers, and active users
seeking a lightweight rechargeable hydrogen water bottle. - Customers wanting flexible cycle options
through separate five- and ten-minute operating modes. - Buyers who value contamination testing
because H2HUBB found no detectable chlorine or ozone. - Customers who prefer an aluminum exterior
combined with a lightweight BPA-free polycarbonate water chamber. - Users choosing between Rose Gold and Onyx Black
through the two currently available product finishes. - Shoppers seeking a ZYNAFLO H2-Pro discount
through the H2HUBB marketplace and the current $40 sale.
The ZYNAFLO H2-Pro is a pressurized hydrogen water bottle. Follow the manufacturer’s filling, lid-sealing, charging, cleaning, water-quality, pressure-release, storage, and maintenance instructions.
